grade the overlapping edges
once the tufts are all sewn grade any overlapping edges to cut down on the bulk. i realized after i got all the back pieces covered that the only overlapped edges were on the long sections and i had graded the short ones too :p oh well, it actually wasn’t noticeable and i wasn’t going to redo it so i’ll have to live with it, but you might want to see which ones really need it before cutting! i did grade the correct ends at least by wrapping loosely around the foam, placing the backs on the seats then marking the end to be cut of with a tiny x on the inside -it got cut off anyway so didn’t show.
start at the bottom edge where you will want to finish, line up the padded seat portion and pin it on then wrap. i use lots of pins to keep everything flat and snug then trimmed off the fabric i didn’t need before sewing. my foam was thick enough that i could bury the pins without poking myself and leave them there till my stitching was done.
stitch with a flat whip stitch you want the fabric to be pulled snug but not super tight, and to be as flat as you can make it on the bottom. that will make attaching the backs easier.
close up of the finished seat back
next post we will attach the seat backs and the couches will be done 🙂
You are currently browsing the archives for 9 December 2014.
Displaying 1 entry.
couch tutorial part 7 finish the seat backs
Continue reading couch tutorial part 7 finish the seat backs »